Vacuum Tubing
Accuflow Systems Tygon Tubing, 3/16 in ID, 7/16 in OD, 50 ft
Tygon E-3603 tubing is a crystal-clear, flexible laboratory tubing designed for medical, diagnostic, and general-purpose fluid transfer where chemical compatibility, visual inspection, and dimensional consistency are required.
- Inner diameter: 3/16 in (4.8 mm)
- Outer diameter: 7/16 in (11.1 mm)
- Wall thickness: 1/8 in (3.2 mm)
- Package length: 50 ft (15 m)
- Material: thermoplastic elastomer tubing
- Durometer: 56 Shore A
- Maximum working pressure (73°F): 47 psi (3.2 bar)
- Temperature range: brittle temperature -51°F (-46°C); maximum recommended operating temperature 165°F (74°C)
- Color: crystal-clear
- Typical applications: medical and diagnostic systems, IVD analyzers, instrumentation fluid transfer
- Additional properties: low extractables, resistance to flex-fatigue, phthalate-free and BPA-free formulation
Accuflow Systems Saint-Gobain Tubing, Norprene TPE, 3/8 in ID, 50 ft
Tygon Norprene A-60-G tubing is a thermoplastic elastomer (TPE) industrial-grade tubing engineered for chemical dispensing and peristaltic pump applications. It offers high flexural fatigue resistance, abrasion and weathering resistance, and a wide operating temperature range for reliable fluid transfer in laboratory and industrial systems.
- 3/8 in ID x 5/8 in OD, 1/8 in wall, 50 ft length.
- Thermoplastic elastomer formulation optimized for chemical dispensing and fluid transfer.
- Temperature range -75°F to 275°F (-60°C to 135°C).
- Maximum working pressure 13 psi at 73°F; 8 psi at 180°F.
- Designed for long life in peristaltic pumps; high flexural fatigue resistance.
- Abrasion, ozone, and UV resistant; low gas permeability.
- Tensile strength 1,000 psi; ultimate elongation 375%.
Accuflow Systems Saint-Gobain Tygon Tubing, 3/4 in ID, 50 ft
Clear, flexible PVC tubing designed for laboratory and process fluid transfer. The tubing uses a phthalate-free PVC formulation for general laboratory, food, and beverage handling where a clear, flexible, and chemically resistant hose is required.
- Inner diameter: 3/4 in (19 mm).
- Outer diameter: 1 in (25.4 mm).
- Wall thickness: 1/8 in (3.2 mm).
- Package length: 50 ft (15 m).
- Material: special PVC, phthalate-free (non-DEHP).
- Typical applications: laboratory fluid transfer, process lines, food and beverage handling.
Accuflow Systems Saint-Gobain Versilic Stopper, Silicone, 5 x 9 x 20 mm
Versilic silicone stoppers, 5 x 9 x 20 mm, provide a tight laboratory seal for tubes, flasks, and vessels. Molded from silicone, they offer broad chemical compatibility and a wide operating temperature range suitable for routine biological and biopharmaceutical workflows.
- Silicone material
- Dimensions: 5 x 9 x 20 mm (0.197 x 0.355 x 0.788 in)
- Pack quantity: 10 per pack
- Withstands temperatures from -70 °C to 250 °C (-94 °F to 482 °F)
- Suitable for biology, hematology, microbiology, and biopharmaceutical applications
- Meets FDA and BGA standards
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 1/8 in ID, 50 ft
Tygon S3 E-3603 tubing is a crystal-clear, flexible laboratory tubing formulated for long flex life, low extractables, and reliable fluid transfer. Its smooth inner bore and resistance to flex-fatigue make it suitable for analytical instrumentation, IVD analyzers, vacuum lines, and general laboratory connections.
- 1/8 in (3.2 mm) inner diameter.
- 3/16 in (4.8 mm) outer diameter.
- 1/32 in (0.8 mm) wall thickness.
- 50 ft (15 m) standard length.
- Crystal-clear color for visual inspection.
- Maximum recommended operating temperature 165 °F (74 °C).
- Brittle temperature -51 °F (-46 °C).
- Shore A hardness 56 (15 s, ASTM D2240).
- Phthalate-free, no BPA or phthalates intentionally added.
- Smooth inner bore, low extractables, non-contaminating formulation.
MilliporeSigma Polyethylene Tubing, 6mm OD x 10 feet long coil
Polyethylene Tubing, 6mm OD x 10 feet long coil.
BURKLE INC PTFE barrel pump Ultrapure withdischarge tube, 37.40 in (95 cm)
Due to the high chemical resistance of the wetted materials PTFE and FEP, this drum pump can also be used to fill liquids that corrode conventional materials such as PP or PVC (with the exception of elemental fluorine).
The drum pump is also suitable for filling high-purity liquids.
The stopcock prevents hazardous vapors from escaping and liquids from dripping after filling.
Cole-Parmer Fitting, 316L Stainless Steel, Straight, Sanitary Clamp to Threaded Adapter, 1-1/2" Clamp x 1-1/4" NPT(M)
Use these 316L stainless steel sanitary fittings in the food, beverage, and pharmaceutical industries. They provide excellent chemical compatibility and corrosion resistance while offering a leak-proof connection; use with our SS clamp for a secure seal. Easily remove to clean or use Clean-in-Place (CIP) process to reduce the chances of dirt and bacteria contaminating the process.
Accuflow Systems PCS Pump Tubing
Purity One™ OneSil Pump biopharmaceutical grade silicone tubing has been formulated for demanding pumping applications in biopharmaceutical processing. This low-hysteresis pump grade silicone tubing is moldable for single-use assemblies, has higher pressure ratings and better kink resistance than traditional 50D silicone tubing, and has a large temperature range, making it an excelling choice for pumping, sampling, filtration, sterile filling and transfer, and buffer and media prep. Full validation guide and USP <665> Extractables testing available.